Menu Holden Logo

holden.wiki

Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • Holden Special Vehicles - Menu
  • Section 6C4 Engine Management – HSV - Gen IV V8
    • 1 Component Replacement
      • 1.1 Accelerator Pedal Position (APP) Sensor
        • Remove
        • Reinstall
      • 1.2 Accelerator Pedal Position (APP) Sensor Support Bracket
      • 1.3 Air Cleaner Assembly
        • Air Cleaner Upper Housing
          • Remove
          • Reinstall
        • Air Cleaner Lower Housing
          • Remove
          • Reinstall
      • 1.4 Engine Control Module (ECM)
        • Remove
        • Reinstall
      • 1.5 Engine Control Module (ECM) Bracket Assembly
        • Remove
        • Reinstall
      • 1.6 EVAP Canister Purge Solenoid Valve
        • Remove
        • Reinstall
      • 1.7 Heated Oxygen Sensors (HO2S)
        • Service Precautions
        • Remove
        • Reinstall
        • Test
          • Front Sensors
          • Rear Sensors
      • 1.8 Intake Air Temperature (IAT) Sensor
        • Test
          • Resistance Check
      • 1.9 Mass Air Flow (MAF) Sensor and Intake Air Duct
        • Remove
        • Reinstall
      • 1.10 Throttle Body
        • Handling Precautions
        • Remove
        • Inspect
        • Reinstall
      • 1.11 Camshaft Position (CMP) Sensor Replacement
        • Removal Procedure
        • Installation Procedure
    • 2 Fastener Tightening Specifications
    • 3 MY2004 HSV VZ LS2 Diagnostic Trouble Codes
    • 4 Diagnostics
      • 4.1 DTC P0513, P0633, P1629, P1632, P1648, P1677, P1678, and
        • DTC Description
        • Circuit Description
        • Condition for Running the DTCs
        • Condition for Setting the DTCs
        • Conditions for Clearing the DTCs
        • Additional Information
        • Test Description
        • Diagnostic Table for DTC P0513, P0633, P1629, P1632, P1648, P1677, P1678 and P1679
      • 4.2 DTC P1575 – Extended Travel Brake Switch Failure
        • Circuit Description
        • DTC Descriptor
        • Conditions for running the DTC
        • Conditions for setting the DTC
        • Action taken when the DTC sets
        • Conditions for clearing the MIL/DTC
        • Diagnostic Aids
        • Test Description
        • Diagnostic Table for DTC P1575
      • 4.3 DTC P0719 – Brake Switch Failure
        • Circuit Description
        • DTC Descriptor
        • Conditions for Running the DTC
        • Conditions for Setting the DTC
        • Action Taken When the DTC Sets
        • Conditions for Clearing the DTC
        • Diagnostic Aids
        • Test Description
        • Diagnostic Table for DTC P0719
      • 4.4 DTC P0724 – Brake Switch Failure
        • Circuit Description
        • DTC Descriptor
        • Conditions for Running the DTC
        • Conditions for Setting the DTC
        • Action Taken When the DTC Sets
        • Conditions for Clearing the DTC
        • Diagnostic Aids
        • Test Description
        • Diagnostic Table for DTC P0724
    • Additional DTC Information for Gen IV V8 (LS2)
Made by Mibble ♥